| design within 24 hours, 2 years warranty for crane parts-HYCRANE |
Easy Maintenance High Efficiency Overhead Ladle Cranes
Ladle cranes are designed to be operated efficiently,
uninterruptedly and safely in continuous use.The design conforms to
the requirements of international standards.
Because of a higher risk level, special safety features are
designed for the ladle cranes that transport molten metal. The main
hoist mechanism includes four independent rope reevings, double
service brakes on primary shafts, and backup brake acting on the
rope drum. Rope equalizer beams are provided with a dampening unit
to slow down equalizer beam tilting in case of wire rope failure.
An upper emergency stop limit switch is also used in the main
hoist. In addition to this overload protection, the ‘emergency
stop’ system bypassed from PLC, derailment supports, main hoist
overspeed supervision, and end limit switches are automatically
standard features of the equipment.
1.Product Pictures
Hycrane-One you need,All we support.
2.Product Details
Hycrane-One you need,All we support.
Metallurgy cranes also manufactured in our company, you can learn
more by following information.
Overhead foundry cranes with hook
bridge foundry cranes with hook mainly consists of main beam, hook
trolley, crane traveling mechanism, cabin and electric controlling
system, etc. Foundry crane is one of the main equipment in the
continuous casting technology of steel making. It is mainly used
transfer the pouring melted iron to the appointed place, and the
thermal-protective coating is added at the bottom of the main
girder. The place where molten nonmetal material and red-hot solid
metal is lifted. The casting overhead crane are heavy duty for
20-24hours working.
Following features for the Foundry Double Girder Overhead Crane:
Heavy Duty and High Efficient
Long Life Span: 30-50years.
Easy for Installation and maintenance.
High Temperature
Full Spare Parts will offer
Dual Lift Motor for Main Lifting Mechanism
| Technical table |
| Item | Data |
| Capacity | 3-74t |
| Span | 6-40m |
| Lifting height | 3-60m |
| lifting speed | 0.1-13m/min |
| cross travelling speed | 2-50m/min |
| long travelling speed | 2-100m/mim |
| Working class | ISOA6-A7/FEM3M-FEM4M |
| Power source | as your demands |
| Other | According to your specific usage, specific model and design will
offer |
In order to make a very quick offer and saving your waiting time,
It's better to fill the information below. Copy and send us the
information together with the enquiry.
| Load Capacity, ton: | (_______) | | Span, S, m: | (_______) | | Lift Height, H, m: | (_______) | | Voltage: | (_______) | | Duty Class: | (_______) | | ? Hours per day: | (_______) | | Control way: | (_______) | | Lift Speed: | (_______) | | Cross & Long travel speed: | (_______) | | Rail supply needed | (_______) | | Power supply system needed | (_______) | | Your nearest port: | (_______) |
| {Tips: 5 ton, 10 ton, 16 ton, 20 ton, 30 ton, 40 ton, 50 ton up to
550 ton} |
| {Tips: 6m ~40m} |
|
| {Tips: 380V, 50Hz, AC, 3-phase or please note} |
| {Tips: A5, A3, If you don't know, please fill the follow} |
|
| {Tips: Remote control, cabin control or pendent control } |
| {Tips: Single speed, double speed, or stepless speed} |
| {Tips: Single speed or stepless speed} |
| {Tips: If yes, please note the Long travel length} |
| {Tips: If yes, please note the Long travel length} |
| {Tips: We quote CIF price need the port. FOB price please note FOB} |
If your workshop roof is very low, Its better to send us a drawing,
a sketch or show us datas and then our Engineer can work out a full
suitable solution just for yours.
Looking forward your kindly inquiry and hope to help your strong
business in near future!
